NEWS

Leading chinese undercarriage pars & Machinery part supplier

Sep 24,2026

Cat D8 High-Drive Undercarriage Inspection and Parts Guide

The D8 high-drive layout places the drive sprocket above the lower roller frame and uses a suspended undercarriage to follow uneven ground. This changes the visual layout, inspection access, and load path compared with a conventional low-drive dozer. A complete check should include the elevated sprocket, track chain, idlers, rollers, bogie groups, shoes, guards, frames, and tension system, while recognizing that D8 generations and serial ranges can use different parts.


Sep 24,2026

Hitachi ZX350LC-7 Undercarriage Inspection and Fitment Guide

A ZX350LC-7 undercarriage must be identified by more than its family name. Hitachi lists LC, LCN, heavy-duty, regional, and application-specific configurations with differences in track frames, shoes, guards, links, and roller arrangements. A useful inspection therefore starts with the exact machine and installed assembly, then checks the complete wear system before replacement parts are selected.


Sep 22,2026

Komatsu D85EX-18 Undercarriage: Conventional vs PLUS Inspection Guide

A Komatsu D85EX-18 may be discussed with a conventional lubricated track arrangement or the optional PLUS Parallel Link Undercarriage System with rotating bushings. Those descriptions are not interchangeable parts labels. Before measuring wear, planning a repair, or requesting components, identify the exact machine, serial range, and installed track system. Then inspect the chain, rollers, idler, sprocket segments, shoes, guards, and suspension as one system.


Sep 22,2026

Volvo EC350E Excavator Undercarriage Wear Inspection Guide

The Volvo EC350E undercarriage supports a heavy production excavator across quarry, earthmoving, and mass-excavation work. A useful inspection does more than label parts as good or bad: it records the same components, positions, and operating conditions over time. That trend can reveal uneven loading, packing, leakage, alignment concerns, or a changing wear rate before a repair plan is prepared.


Sep 20,2026

Dozer Track Bushing Pitting: Inspection and Replacement Checks

Dozer track bushing pitting appears as clusters of small cavities or broken surface areas in the sprocket contact zone. It should be evaluated with bushing diameter, cracking, chain pitch, sprocket profile, track tension and jobsite material. Dirt, rust or a polished contact band alone does not confirm damaging pitting.


Sep 20,2026

Excavator Track Link Cracks: Pin Boss, Rail and Shoe Seat Inspection

A visible crack in an excavator track link is a stop-and-inspect finding, not ordinary wear. Clean and document the area, isolate the machine and examine the complete chain, track shoes, rollers, guards, sprocket engagement and operating history before deciding whether a link or complete chain needs replacement.


Sep 18,2026

Dozer Sprocket Segment Bolts Keep Coming Loose: Inspection Guide

A sprocket segment bolt that repeatedly loosens is not just a fastener problem. Clamp load may be lost because of contaminated mating faces, damaged threads, stretched or incorrect hardware, hub-hole wear, an incorrect installation procedure, segment mismatch, or abnormal chain loading. Do not keep tightening the bolt without finding the reason.


Sep 18,2026

Excavator Track Link Rail Scalloping: Causes and Inspection

Track link rail scalloping is a repeated wave-like wear pattern on the surfaces that run against the rollers and idler. It can cause rough travel and vibration, but the pattern alone does not identify one failed part. Inspect the chain, rollers, idler, alignment, tension, debris packing, terrain and operating history as a system.


Sep 17,2026

Dozer Front Idler Wear Signs: Ridging, Leaks and Alignment

Dozer front idler wear is best judged as a pattern, not from one shiny surface. Clean the idler, compare both sides, examine tread and flange profiles, look for oil leakage and abnormal movement, and then inspect track tension, guides, chain rails, and the recoil system before choosing a repair.


Sep 17,2026

Excavator Track Roller Oil Leak: Causes, Inspection and Replacement

An oily ring around a bottom roller seal can be an early warning, but a wet roller is not automatically a failed roller. Clean the area, identify the fluid source, compare it with nearby rollers, and look for heat, rough rotation, flat spots, flange wear, or abnormal noise before deciding what to replace.


< 1...456...30 >

Related Posts

How Should The Supporting Wheels Be Selected To Avoid Stepping On Thunder?

High-quality support wheels mainly depend on the performance of its steel. The material of the roller body is generally 50Mn, 40Mn2, (MN: synonymous with the element of manganese).

Carrier Wheels Are Suitable For Various Models At Home And Abroad

Sprocket wheels are mainly used in various crawler bulldozers, excavators, pavers, milling machines, rotary drilling rigs or other crawler machinery equipment at home and abroad.

Contact Us

E-mail :
sales@china-ysm.com

Phone/WhatsApp:
+86-18606961587

Address:
No.8 Binjiang Street, Binjiang Industrial Zone, Xiamei Town, Nan An City, Quanzhou City, Fujian Province, China

AW-18202131004