NEWS

Leading chinese undercarriage pars & Machinery part supplier

Aug 19,2026

Excavator Track Master Link: Inspection and Fitment Guide

A track master link is the designated connection within many steel track chains that allows the chain to be separated or assembled using the correct service procedure. Its appearance and connection design vary by manufacturer, track series and machine. It should be inspected as one critical joint within the complete track chain—not treated as a generic link that can be removed or replaced by improvised methods.


Aug 19,2026

Bulldozer Front Idler Inspection, Wear and Fitment Guide

The front idler guides the track chain at the front of a bulldozer and works with the recoil and track-adjuster system to manage the track path. Its tread, flanges, guides and seals should be inspected as part of the whole undercarriage. A worn idler can be a symptom of chain, alignment, tension, debris or operating-condition issues—not automatically the original cause


Aug 18,2026

Bulldozer Carrier Roller Inspection and Fitment Guide

A bulldozer carrier roller supports the upper return run of the track chain. It is smaller and positioned differently from the lower track rollers, but it can still create accelerated chain wear if debris prevents rotation or if its alignment, mount or sealing area changes. An effective inspection follows the upper track path and checks the carrier roller as part of the whole undercarriage.


Aug 18,2026

Excavator Long-Term Storage and Recommissioning Checklist

A crawler excavator that will sit unused for weeks or months needs more than a parked position and a cover. Moisture, contamination, battery discharge, rod corrosion, rodent damage and packed undercarriage debris can create problems while the machine is idle. The safest plan has two stages: prepare the exact machine for storage, then inspect and recommission it before productive work resumes.


Aug 17,2026

Excavator Track Guiding Guard: Inspection and Fitment Guide

An excavator track guiding guard is a structural undercarriage component that helps guide the link assembly and protect rollers and related areas from rock and debris. It is not a cure for an incorrectly adjusted track, a worn chain or a damaged idler. Checking the guard together with the track path gives operators a better chance of finding contact damage before the problem spreads.


Aug 17,2026

Bulldozer Track Roller Inspection: Wear, Leaks and Maintenance

Lower track rollers carry a bulldozer's weight while guiding the track chain along the roller frame. Because they work close to dirt, rock, moisture and impact loads, a small oil trace, a roller that does not rotate normally or an uneven wear pattern can be an early warning. The practical response is a structured inspection of the entire undercarriage, not replacing one roller by appearance alone.


Aug 14,2026

How to Identify an Excavator Sprocket Before Ordering

Two excavator drive sprockets can look nearly identical and still differ in tooth geometry, mounting pattern, pilot diameter or offset. A reliable inquiry starts with the machine identity and part reference, then uses measurements and track-chain information to confirm the candidate. Tooth count or one mobile-phone photo is not enough.


Aug 14,2026

Excavator Long-Distance Travel: Undercarriage Heat, Wear and Inspection

Crawler excavators can travel around a jobsite, but repeated long tracking is not the same duty as digging from one position. Every revolution makes the chain articulate around the sprocket and idler while rollers carry the machine load. A planned inspection before and after a long move helps operators spot changes without treating normal warmth as proof of a failed part.


Aug 13,2026

Volvo EC210 Undercarriage Parts Guide: How to Avoid Series and Fitment Mistakes

“Volvo EC210 undercarriage parts” describes a useful search category, but it is not enough information for a safe order. Current EC210 machines, EC210D, EC210B and regional configurations can differ in chain, shoe, roller, guard and serial-specific parts. The correct process begins with the full designation and machine plate, then confirms the existing component and its measurements.


Aug 13,2026

Excavator Maintenance After Heavy Rain and Mud: What to Check Before the Next Shift

Heavy rain changes more than surface appearance. Mud can pack around the undercarriage, wet grit can hide leaks and loose hardware, condensation or water can collect in the fuel system, and moisture can expose weak electrical connections. A post-rain inspection should therefore cover the complete excavator—not just wash the tracks.


< 1...91011...30 >

Related Posts

How Should The Supporting Wheels Be Selected To Avoid Stepping On Thunder?

High-quality support wheels mainly depend on the performance of its steel. The material of the roller body is generally 50Mn, 40Mn2, (MN: synonymous with the element of manganese).

Carrier Wheels Are Suitable For Various Models At Home And Abroad

Sprocket wheels are mainly used in various crawler bulldozers, excavators, pavers, milling machines, rotary drilling rigs or other crawler machinery equipment at home and abroad.

Contact Us

E-mail :
sales@china-ysm.com

Phone/WhatsApp:
+86-18606961587

Address:
No.8 Binjiang Street, Binjiang Industrial Zone, Xiamei Town, Nan An City, Quanzhou City, Fujian Province, China

AW-18202131004