NEWS

Leading chinese undercarriage pars & Machinery part supplier

Aug 12,2026

Excavator Track Roller Not Turning: Causes, Warning Signs and Safe Inspection

A track roller that does not rotate can drag against the track-chain rail instead of rolling with it. That friction may generate heat and wear a flat path into the roller shell, but “not turning” is still a symptom—not a complete diagnosis. Packed material, a seized internal bearing or bushing, lubricant loss, seal damage, misalignment and excessive track tension all require consideration.


Aug 12,2026

Komatsu PC200-10M0 Undercarriage Parts Guide: Identify Components Before Ordering

A PC200-10M0 undercarriage quotation should begin with the complete machine identity—not simply “PC200.” Series, market specification, shoe option, serial number and previous repairs can change the required component or hardware. This guide explains the main wear parts, the official base configuration and the checks that reduce avoidable fitment errors.


Aug 11,2026

Bulldozer Track Won't Stay Tight: Adjuster, Recoil and Wear Checks

If a bulldozer track is adjusted correctly but soon becomes loose again, do not keep pumping grease into the system. The symptom may come from an external grease leak, a relief valve or fitting that is not sealing, internal adjuster bypass, restricted idler movement, advanced chain wear, an idler near the end of available travel, or a measurement made under different packing conditions. The recoil spring and grease-filled adjuster also contain stored energy, so diagnosis must begin with safe inspection rather than disassembly.


Aug 11,2026

Excavator Track Chain Jumping on the Sprocket: Causes and Safe Checks

A bang, lurch or visible chain rise at the drive sprocket is a stop-and-inspect symptom. An excavator track chain may jump or climb because it is too loose, the chain pitch and sprocket profile are badly mismatched, a joint is stiff, debris is packing the drive area, or the running system is no longer guiding the chain correctly. It is not safe to assume that adding grease or replacing the sprocket alone will solve every case.


Aug 10,2026

Bulldozer Grouser Wear: How to Inspect Track Shoes and Traction Loss

Bulldozer grousers provide the raised steel edge that penetrates the ground and transfers pushing force. As grouser height and profile wear away, traction can fall, but poor performance should not be blamed on the shoes alone. Ground condition, track tension, chain wear, packed material, operator technique and machine balance can create similar symptoms. A reliable inspection compares several shoes, both track sides and the complete undercarriage under the same conditions.


Aug 10,2026

Cat 320 Excavator Undercarriage Parts Guide: What to Confirm Before Ordering

A request for “Cat 320 undercarriage parts” is a useful starting point, but it is not enough to confirm a track roller, carrier roller, front idler, sprocket, track chain or track shoe. The 320 name appears across different generations and configurations, including 320, 320 GC, 320C/320C L and 320D references in Caterpillar's current parts material. Accurate sourcing therefore begins with the complete model suffix, serial number or PIN, existing part number, photographs and dimensions.


Aug 07,2026

Excavator Hot-Weather Maintenance Checklist: Cooling, Hydraulics and Undercarriage

High ambient temperature reduces the margin available to an excavator's cooling system, while dry dust can restrict airflow, contaminate inspection surfaces and accelerate undercarriage abrasion. A useful hot-weather plan is not a single coolant check: it combines a safe pre-shift walk-around, clean heat exchangers, correct fluids and filters, hydraulic monitoring, undercarriage care and a clear response to warning indicators.


Aug 07,2026

How to Measure an Excavator Track Roller Before Ordering

An excavator track roller can look correct in a photograph and still fail to fit the track frame, mounting holes or chain geometry. The safest ordering method starts with the machine identity and part number, then uses a consistent set of roller and mounting dimensions as confirmation. This guide explains which measurements matter, where common mistakes occur and what to send to a supplier before a replacement is approved.


Aug 06,2026

Bulldozer Undercarriage Maintenance in Rocky Ground: Impact-Wear Checklist

A bulldozer working on blasted rock, shale, gravel or quarry floors exposes its undercarriage to repeated impact, abrasion and side loading. The damage does not stay in one component: track shoes, links, bushings, sprocket segments, rollers and idlers work as a system. This guide explains what operators and maintenance teams should inspect, how to read common wear patterns and what information a parts supplier needs before confirming fitment.


Aug 06,2026

Excavator Track Group vs Track Chain: What Is the Difference?

An excavator track chain is the articulated link, pin and bushing assembly that runs around the sprocket, rollers and idler. A complete track group normally adds the correctly matched track shoes and shoe hardware to that chain. The terms are sometimes used differently in quotations, so buyers should confirm the exact supply scope, chain design, link count, pitch, shoe width, mounting pattern and master connection instead of relying on a product name alone.


< 1...101112...30 >

Related Posts

How Should The Supporting Wheels Be Selected To Avoid Stepping On Thunder?

High-quality support wheels mainly depend on the performance of its steel. The material of the roller body is generally 50Mn, 40Mn2, (MN: synonymous with the element of manganese).

Carrier Wheels Are Suitable For Various Models At Home And Abroad

Sprocket wheels are mainly used in various crawler bulldozers, excavators, pavers, milling machines, rotary drilling rigs or other crawler machinery equipment at home and abroad.

Contact Us

E-mail :
sales@china-ysm.com

Phone/WhatsApp:
+86-18606961587

Address:
No.8 Binjiang Street, Binjiang Industrial Zone, Xiamei Town, Nan An City, Quanzhou City, Fujian Province, China

AW-18202131004