NEWS

Leading chinese undercarriage pars & Machinery part supplier

Oct 30,2026

CASE CX210E-S Daily Maintenance: A Pre-Shift Checklist

CASE CX210E-S daily maintenance should follow a repeatable whole-machine route: ground and exterior, fluids and filters, cooling, hydraulics, crawler, attachments, then operator checks. Keep the exact E-S model and serial-specific manual in view. A pre-shift inspection is not a substitute for scheduled servicing or a complete diagnostic test.


Oct 30,2026

Excavator Saltwater Maintenance: Cleaning and Inspection Checks

Excavator saltwater maintenance begins by identifying what happened: coastal spray, salty mud on the crawler, or possible water entry into a component. Those are different situations. Clean and inspect external exposure using the exact manual, but do not treat a freshwater rinse as proof that an immersed or contaminated machine is ready to restart.


Oct 29,2026

DEVELON DD130 Undercarriage: Roller, Guard and Parts Checks

A DEVELON DD130 undercarriage inspection should start with the installed configuration, not a generic parts list. The official DD130 brochure describes single- and dual-flange rollers and different guard options. Record which parts are fitted, where they are installed, and what condition was actually observed before requesting replacements.


Oct 29,2026

Track Bushing Wear vs Chain Pitch Wear: What Is the Difference?

Track bushing wear vs chain pitch wear is a distinction worth making before a crawler repair. The bushing outside contacts the sprocket; the pin and bushing inside form the moving joint. An outside-diameter reading and a pitch reading describe different conditions. Neither should be used as a substitute for the other.


Oct 28,2026

Komatsu D51EX-24 and D51PX-24 Pre-Shift Maintenance Checklist

Komatsu D51EX-24 and D51PX-24 daily maintenance should cover the complete machine, not just track tension or visible shoe wear. Build the pre-shift check around the exact operation and maintenance manual, then record fluids, cooling, hydraulics, travel-system warnings, crawler condition, blade hardware, and safety equipment in a repeatable order.


Oct 28,2026

Excavator Undercarriage Checks Before and After Transport

An excavator undercarriage inspection before transport creates a useful baseline for the receiving team. Repeat the same checks after unloading so pre-existing wear, newly observed marks, and unresolved defects can be compared. A condition report supports maintenance and communication; it is not a loading plan, transport certificate, or proof of who caused damage.


Oct 27,2026

Hitachi ZX250LC-7 and ZX250LCN-7 Undercarriage Inspection Guide

Hitachi ZX250LC-7 and ZX250LCN-7 undercarriage parts should be identified from the complete model, serial number, original market, and installed crawler. The official UK product page groups the two models, while the European brochure distinguishes their configurations. Shared brochure coverage does not establish that every roller, chain, shoe, or mounting arrangement is interchangeable.


Oct 27,2026

Dozer Track Shoes: Regrouser or Replace?

Dozer track shoe regrousering may be worth assessing when the ground-engaging rib is worn but the shoe remains structurally suitable. It is not a way to make every old shoe reusable. Before comparing rebuild and replacement quotations, inspect the plate, mounting areas, previous repairs, and intended application, then obtain a qualified repair decision.


Oct 26,2026

Cat 323 vs 323 GC Undercarriage Parts: What to Verify

Cat 323 vs 323 GC undercarriage parts should be compared component by component, not treated as one interchangeable package because the model numbers are close. Some parts may have a confirmed shared application, while others require a different reference. The safe starting point is the complete machine identity, Product Identification Number, and actual installed crawler.


Oct 26,2026

Track Shoe Mud Holes: Purpose, Fitment, and Maintenance

Track shoe mud holes are designed openings that can help suitable packed material escape from a track group. They are different from the holes used to bolt the shoe onto the links. A center-hole shoe may be useful in an approved application, but it is not a universal upgrade and does not remove the need to clean and inspect the undercarriage.


< 1234...28 >

Related Posts

How Should The Supporting Wheels Be Selected To Avoid Stepping On Thunder?

High-quality support wheels mainly depend on the performance of its steel. The material of the roller body is generally 50Mn, 40Mn2, (MN: synonymous with the element of manganese).

Carrier Wheels Are Suitable For Various Models At Home And Abroad

Sprocket wheels are mainly used in various crawler bulldozers, excavators, pavers, milling machines, rotary drilling rigs or other crawler machinery equipment at home and abroad.

Contact Us

E-mail :
sales@china-ysm.com

Phone/WhatsApp:
+86-18606961587

Address:
No.8 Binjiang Street, Binjiang Industrial Zone, Xiamei Town, Nan An City, Quanzhou City, Fujian Province, China

AW-18202131004