Jul 22,2026
When to Turn or Replace Excavator Track Chains? A Fleet Manager’s Guide to Track Pitch Elongation
For heavy equipment fleet managers, knowing when to repair or replace an excavator track chain can significantly reduce operating costs and prevent unexpected downtime. Track pitch elongation is one of the most reliable indicators of crawler undercarriage wear.
Jul 22,2026
Excavator Undercarriage Parts Explained: Names, Functions and Wear Signs
An excavator undercarriage is a connected drive, support, guidance and ground-contact system. The sprocket drives the track chain, the front idler guides it, bottom rollers carry the machine, carrier rollers support the upper track run, and track shoes transfer traction to the ground. Understanding these relationships makes inspection, fault reporting and parts ordering more accurate.
Jul 22,2026
How to Choose Excavator Track Shoe Width for Soft, Firm and Rocky Ground
Excavator track shoe width affects flotation, average ground pressure, overall machine width, steering resistance and the loads transmitted into the track chain. Wider is not automatically better: the correct choice is an OEM-approved width that provides the flotation and stability required for the actual job without adding unnecessary undercarriage stress.
Jul 21,2026
Why Does an Excavator Pull to One Side? 9 Checks Before Replacing a Travel Motor
An excavator that will not travel straight may have unequal ground resistance, an undercarriage problem, a brake or final-drive fault, or unequal hydraulic delivery to the two travel motors. The direction of the pull is useful evidence, but it is not enough to identify the failed component.
Jul 21,2026
Why Does an Excavator Track Keep Coming Off? 8 Causes to Check
An excavator track that repeatedly comes off is usually a warning that tension, component guidance, wear, alignment, packed material or operating conditions need attention. Reinstalling the track may restore movement, but it does not identify why the derailment happened.
Jul 20,2026
Why Excavator Track Shoe Bolts Keep Loosening: 7 Causes to Check
A track shoe bolt that repeatedly comes loose is usually a joint problem, not just a bolt problem. Incorrect clamping force, contaminated mating surfaces, damaged holes, bent shoes, wrong hardware and undercarriage loads can all allow movement between the shoe and track link.
Jul 20,2026
Why Bulldozer Undercarriage Wears Unevenly: 7 Causes to Check
When one side, one roller position or one edge of a dozer track wears faster, the visible part is not always the root cause. Operating pattern, slope work, track tension, packing, alignment and mismatched wear can all change how the undercarriage carries load.
Jul 17,2026
Excavator Sprocket Wear: 6 Signs and Track Chain Matching Tips
A worn drive sprocket does more than change tooth shape. It can disturb engagement with the track chain, create abnormal noise and concentrate wear on bushings. This guide explains what to inspect before ordering a replacement.
Jul 17,2026
Excavator Undercarriage Inspection Checklist: 8 Areas to Check
A practical walk-around guide for checking track shoes, chains, rollers, idlers, sprockets, track tension and uneven wear before small problems spread through the complete running gear.
Jul 16,2026
Excavator Daily Maintenance Checklist: 10 Systems to Inspect
A useful excavator daily maintenance checklist covers the entire machine—not only the engine or undercarriage. Before each shift, inspect for leaks and damage, confirm fluid and cooling conditions, check the hydraulic system, tracks, work equipment, cab controls and safety devices, and record anything unusual. The exact procedure and service limits must always come from the operation and maintenance manual for the specific machine.
Related Posts
How Should The Supporting Wheels Be Selected To Avoid Stepping On Thunder?
High-quality support wheels mainly depend on the performance of its steel. The material of the roller body is generally 50Mn, 40Mn2, (MN: synonymous with the element of manganese).
Carrier Wheels Are Suitable For Various Models At Home And Abroad
Sprocket wheels are mainly used in various crawler bulldozers, excavators, pavers, milling machines, rotary drilling rigs or other crawler machinery equipment at home and abroad.
Contact Us
E-mail :
sales@china-ysm.com
Phone/WhatsApp:
+86-18606961587
Address:
No.8 Binjiang Street, Binjiang Industrial Zone, Xiamei Town, Nan An City, Quanzhou City, Fujian Province, China